TY-150

PWM fan, provides simple and easy adjustment of fan speed with the latest ETC IC .

Seven Silent Torpedo Blades – “submerges”, gives most quiet and efficient airflow

Two Ball Bearing – to ensure consistent and stable rpm, prolonged lifetime of usage.

Aerodynamic body–Less friction around the edges and give more centered and concentrated airflow.

 

This fan is designed with PWM function, and full speed will apply when pluged into 3 pins instead of 4 pins .
The TY-150 can be pluged into the 3 pin; you can tell from the jack, there is fool-proof design on the jack so wrong installation of the pins are avoided .
Please first refer to the Support FAQ when using your Thermalright PWM fan on your mainboard’s Chassis_Fan Socket.
Category:

Description

Technical Spec :

Fan Dimension : L170 mm x H153 mm x W25.5 mm
Fan Weight : 180g
Fan Speed : 500~1100RPM (PWM)
Sound Level : 22 – 34 dB(A)
Airflow : 38.2 – 84.2 CFM

FAQ 1
Question : When I plug in my Thermalright TY-143 Fan onto my (4 Pin PWM) Chassis_Fan socket, I cannot get the TY-143 to spin at the rated 600RPM.  Is this normal, or is my TY-143 faulty?
Answer : There are different types of PWM sockets on the mainboard.  Usually, only the CPU_Fan socket provides true PWM control.  While other sockets such as a PWM Chassis_Fan socket does not use true PWM signals to control fan RPM, but does so through voltage adjustment.  You will notice that under bios settings you can only adjust the RPM % of the Chassis_Fan.  Using voltage adjustment you can still make fan speed (RPM) adjustment, but the level of control will not be as precise as true PWM control.  Therefore, we cannot guarantee that our PWM fans will meet the fan’s full RPM range.  The supplied voltage of the Chassis_Fan socket will depend on the designs of mainboard manufacturers, as a general rule of thumb we suggest to set the Chassis_Fan at no less than 50% duty.  If you need more precise setting information based on mainboard product, please feel free to write to our support form.
FAQ 2
Question : If the mainboard CPU_Fan socket and the Chassis_Fan socket uses different methods of fan speed control, how can I synchronize the same fan duty cycle for both CPU and Chassis fan?
Answer : If you need to use true PWM control for both your CPU and Chassis fan, we suggest you purchase our proprietary PWM Extension Y-Cable.  Using the PWM Extension Y-Cable will provide synchronized PWM control.  However, using the Y-Cable on two fans with different RPM’s will cause irregular fan speed detection, because a single fan socket RPM speed sensor cannot monitor two RPM signals.
Click to download Installation Guide
Click to download Product Images

Related products